The Vicky is an automated solution for loading and unloading doors, which can be positioned upstream or downstream of your production line. Thanks to its 2-axis servo motor system, it offers precise, fast, and secure door positioning.
Compatible with all EuGenie equipment, the Vicky improves the fluidity of your operations while guaranteeing safe handling thanks to its suction cup lifting system and photoelectric protection (optional).
The Vicky adapts to different production needs with three distinct models:
| VL-1 Frequently Asked Questions | |
| Quick answers about the Vicky VL-1 vertical door loader, its automated door handling capabilities, vacuum lifting system, barcode integration, line configurations, safety features, and installation requirements. | |
| What is the Vicky VL-1? | The Vicky VL-1 is a vertical door loader designed to automate door loading, unloading, and transfer around a production line. It helps reduce manual handling, protect door surfaces, and maintain a consistent production flow. |
| What door handling operations can the VL-1 automate? | The VL-1 can automate door loading, unloading, pallet pickup, and transfer between production stations. It can be configured for infeed, outfeed, or both depending on the production line layout. |
| What types of doors can the VL-1 handle? | The VL-1 is designed to handle flush doors, panel doors, doors with cutouts, and sidelights. Final compatibility should be confirmed based on the customer’s door construction, dimensions, surface characteristics, and production requirements. |
| What door sizes can the VL-1 handle? | The VL-1 supports doors up to 96 inches long, from 9 3/4 to 48 inches wide, with stack heights up to 50 inches. Final capacity should be validated with Eugenie based on the customer’s doors, pallet configuration, and application. |
| How does the VL-1 protect door surfaces during handling? | The VL-1 uses vacuum lifting with suction cups, foam pads, and non-marking rollers to help reduce marks, scratches, dents, and other surface damage during automated door transfer. |
| How does the VL-1 vacuum lifting system work? | The VL-1 uses an adaptable vacuum pickup system to lift and transfer a wide variety of doors and sidelights. The system measures doors and adjusts pickup height to support accurate and repeatable handling. |
| How fast can the VL-1 handle doors? | The VL-1 is designed for pickup cycles under 60 seconds. Actual cycle time depends on door dimensions, pallet arrangement, production line configuration, and the required transfer sequence. |
| Does the VL-1 support barcode or ERP integration? | Yes. The VL-1 supports ERP and barcode integration as part of a connected production workflow. Doors can be scanned at the HMI or identified at the picker station so the correct production information can be sent to downstream equipment. |
| Can the VL-1 integrate with an automated door production line? | Yes. The VL-1 supports line-to-line communication and can be configured for infeed, outfeed, or combined handling. Left or right mirror configurations and front or rear loading setups allow the system to adapt to different automated door production layouts. |
| What safety features are included on the VL-1? | The VL-1 includes interlocked guarding, photoelectric protection, emergency stop systems, and secure conveyor access to help support safer automated door handling and production line operation. |
| Does Eugenie provide integration and production line support for the VL-1? | Yes. Eugenie provides hands-on expertise for equipment layout, commissioning, support, optimization, and future production growth, helping manufacturers integrate automated door handling into reliable and scalable production lines. |
| What are the machine requirements? | The VL-1 requires 480 V three-phase electrical power, an Internet connection, and 100 PSI at 15 CFM of compressed air. Final installation requirements should be confirmed with Eugenie based on the production line layout and handling configuration. |
| What is the footprint of the VL-1? | The VL-1 measures approximately 14 feet 7 inches long, 13 feet wide, and 11 feet 2 inches high, with a listed footprint of 190 square feet. Final layout requirements should be reviewed with Eugenie before installation. |
The Vicky VL-1, VL-2, and VC-1 models are designed to meet the various needs of manufacturing workshops. Easy to integrate, they ensure a smooth management of the production flow while providing optimal safety for the operator.
The Vicky simplifies door loading and unloading while offering speed, safety, and precision. Automate intelligently and improve the productivity of your workshop.
To find out more about the Vicky and how it can improve your processes, request a free consultation or download the full brochure!
