The ANNY CN-M is a next-generation, high-speed automated CNC door jamb and frame machining center designed to bring complete jamb preparation into one continuous production workflow. Combining automatic feeding, dedicated cut-to-length stations, multiple machining heads, and precision CNC machining, the CN-M delivers exceptional productivity while dramatically reducing manual handling and operator requirements.
Building on the proven ANNY CN-X platform, this modular CNC jamb machine offers a scalable solution for automated door frame manufacturing. Its flexible architecture allows manufacturers to expand machining capabilities and automation as production demands grow.
From cutting and drilling to hinge mortising, strike preparation, dados, notching, and routing, the ANNY CN-M integrates essential door jamb manufacturing operations into one coordinated CNC production system. Dedicated cutting stations and multiple machining heads help reduce bottlenecks, accelerate cycle times, and deliver consistent machining accuracy.
Designed for manufacturers seeking higher production capacity with fewer manual operations, the CN-M simplifies complex jamb preparation while supporting repeatable quality. With an estimated base footprint of approximately 73 sq. ft., depending on configuration, it provides advanced CNC door frame machining and automation in a practical production cell.
Whether you’re replacing traditional jamb machinery, increasing production capacity, or automating your door frame manufacturing line, the ANNY CN-M delivers a flexible solution built around speed, precision, simplicity, and reduced operator dependency.
Contact Eugénie International to discuss CN-M configurations, production lead times, and equipment availability for your manufacturing requirements.
| Feature | Practical Customer Benefit |
|---|---|
| All-in-one CNC jamb machining | Combine cut-to-length, hinge mortising, strike preparation, dado cutting, drilling, routing, and notching into one coordinated door frame production workflow, reducing repeated handling and separate machining operations. |
| Automatic feeding and minimal operator intervention | Automate material feeding and movement through the CNC machining process, reducing manual loading and allowing operators to focus on material supply and production oversight. |
| Multiple CNC machining heads | Increase jamb production capacity and improve machining efficiency with multiple heads and specialized operations designed to reduce cycle times and production bottlenecks. |
| Dedicated saw and dado modules | Perform precision cut-to-length and dado operations at dedicated stations, allowing flexible CNC machining processes to operate more efficiently. |
| Modular and expandable CNC platform | Configure your door jamb machining center around current production needs and expand machining capabilities and automation as your manufacturing requirements evolve. |
| Jamb, astragal and mullion machining | Support a broader range of door frame components, hardware requirements, and manufacturing applications within one flexible machining platform. |
| Flexible material handling and clamping | Adapt the system with available feeding, ejection, conveyor, cart handling, and manual or servo clamping options to improve positioning, repeatability, and production flow. |
| Intuitive in-house CNC software | Simplify machine operation, production management, and operator training with user-friendly software developed and supported directly by Eugénie. |
| ERP and barcode integration | Connect compatible production management systems to streamline job identification, reduce manual data entry, and improve order-to-machine workflow. |
| Direct, real-time technical support | Get assistance from the team behind the machinery and software to simplify troubleshooting, resolve production issues, and minimize unnecessary downtime. |
| Fully enclosed CNC machining and scrap collection | Support safer operation and a cleaner production environment with an enclosed machining area and integrated scrap collection. |
| Compact production footprint | Integrate advanced automated door jamb machining into a practical production cell, with an estimated base footprint of approximately 73 sq. ft., depending on configuration. |
| Multi-material machining capabilities | Process wood, PVC, composite, and aluminum jamb profiles with suitable tooling and configuration, subject to technical validation. |
| Specification | ANNY CN-M Details |
|---|---|
| Machine type | High-speed, modular and automated CNC door jamb and frame machining center |
| Primary application | Automated door jamb manufacturing, frame preparation, astragal machining and mullion machining |
| Machining operations | Cut-to-length, hinge mortising, strike plate preparation, dado cutting, notching, angled cuts, drilling, routing and hardware machining, depending on configuration |
| Machining system | Multiple CNC machining heads with dedicated saw and dado modules; number and configuration of heads depend on the selected package |
| Material feeding | Automatic self-feeding system with available gravity feeding, motorized conveyor, automatic ejection and bulk cart-feeding configurations |
| Clamping system | Manual and servo-controlled clamping options, depending on production requirements |
| Supported materials | Wood, PVC, composite and aluminum jamb profiles, subject to tooling and technical validation |
| Jamb dimensions and capacity | Configuration-dependent. Contact Eugénie to confirm supported profile dimensions, maximum lengths and machining capacity. |
| Approximate machine length | 12 ft 6 in (preliminary; varies by configuration) |
| Approximate machine width | 5 ft 10 in (preliminary; varies by configuration) |
| Approximate machine height | 6 ft 8 in (preliminary; varies by configuration) |
| Approximate machine weight | 4,500 lb (preliminary; subject to final configuration) |
| Approximate footprint | 73 sq. ft. estimated base footprint; additional automation and material handling may require more space |
| Electrical requirements | 480 V, three-phase (preliminary). Final voltage, current and power requirements must be confirmed for the selected configuration. |
| Pneumatic requirements | 100 PSI / 15 CFM (preliminary). Final compressed-air requirements depend on the configuration. |
| Network connection | Ethernet RJ45; final network and integration requirements to be confirmed |
| Machine software | Intuitive CNC control software developed in-house by Eugénie International |
| ERP and barcode integration | Integration with compatible ERP systems and barcode-driven production workflows, subject to interface requirements |
| Safety enclosure | Fully enclosed machining environment; final safety configuration subject to technical validation |
| Scrap collection | Integrated scrap and machining waste collection system; collection configuration depends on the selected modules |
| Production throughput | Dependent on jamb profiles, machining operations, material handling and machine configuration. Contact Eugénie for application-specific performance details. |
| Technical support | Direct technical assistance and real-time support for machine operation and Eugénie’s in-house software |
| Configuration and availability | Modular options, final technical specifications, production lead times and availability are confirmed according to customer requirements. |
| Technical note: Specifications are preliminary and may vary depending on the selected machining modules, feeding system, automation options and production requirements. Contact Eugénie International to confirm the final technical configuration and installation requirements. | |
| ANNY CN-M Frequently Asked Questions | |
| Explore the ANNY CN-M automated CNC door jamb machining center, including its all-in-one machining capabilities, automatic feeding, modular configuration, production efficiency, and smart manufacturing integration. | |
| What is the ANNY CN-M CNC door jamb machining center? | The ANNY CN-M is a high-speed, modular CNC door jamb and frame machining center that combines automatic feeding, dedicated cutting stations, and multiple machining heads. It is designed to automate door jamb preparation, reduce manual handling, and improve manufacturing productivity. |
| Can the CN-M complete all door jamb machining operations in one system? | Yes. The CN-M brings essential door jamb manufacturing operations together in one coordinated workflow, including cut-to-length, hinge mortising, strike preparation, dados, drilling, routing, and notching. Available modules and machining capabilities depend on the selected configuration. |
| How many operators does the automated CN-M require? | The CN-M is engineered for low-labor, automated jamb production. Its self-feeding system reduces repetitive loading and handling, allowing operators to focus primarily on supplying material and managing carts. Actual staffing requirements depend on the production layout, feeding configuration, and workflow. |
| How does the CN-M increase door jamb production speed? | The CN-M combines dedicated cut-to-length and dado stations with multiple CNC machining heads. Separating cutting operations from flexible CNC machining helps reduce bottlenecks, improve cycle times, and increase production throughput. Actual machining speed depends on part specifications and machine configuration. |
| What door frame and jamb machining operations can the CN-M perform? | The CN-M supports hinge mortising, strike plate machining, cut-to-length operations, dado cutting, notching, drilling, routing, and angled cuts. Configurations can also support astragal and mullion machining for different door frame manufacturing requirements. |
| What materials can the ANNY CN-M machine? | The CN-M is designed for wood, PVC, composite, and aluminum jamb and frame profiles, subject to the selected tooling and configuration. Material compatibility, profile dimensions, and machining requirements should be confirmed with Eugénie International. |
| Can the modular CNC machine be expanded as production grows? | Yes. The CN-M features a modular and scalable CNC platform that can be configured around current production needs and expanded with additional machining and automation options, subject to technical compatibility. This flexibility helps manufacturers plan for future capacity increases. |
| Does the CN-M offer automatic jamb feeding and unloading? | Yes. The automatic jamb feeding system supports continuous material movement through the machining process. Available handling configurations include gravity feeding, automatic ejection, motorized conveyors, and bulk feeding with a cart system. Further cart-handling automation is being developed. |
| Can the CN-M connect to ERP systems and barcode production lists? | Yes. The CN-M supports integration with compatible ERP systems and barcode-driven manufacturing workflows. This helps simplify job identification, reduce manual data entry, and coordinate CNC machining instructions with production requirements. |
| Is the CN-M fully enclosed, and how does it handle machining waste? | The CN-M features a fully enclosed CNC machining environment with integrated scrap collection. This helps contain machining waste, support operator safety, and maintain a cleaner, more efficient door jamb production area. |
| How easy is the CN-M software to operate, and what support is available? | The CN-M uses Eugénie’s intuitive in-house CNC software, designed to simplify machine operation and production management. Eugénie also provides direct, real-time technical assistance for machine and software support, helping manufacturers troubleshoot issues and maintain production continuity. |
The Anny CN-M helps door manufacturers simplify jamb machining, reduce manual handling, and improve production flow with a modular platform built around real production needs.
From hinge and strike preparation to dado, cut-to-length, and future automation options, the CN-M gives your shop a scalable path toward a more efficient jamb production process.
The Anny CN-M is designed to help door manufacturers simplify jamb machining, reduce manual handling, and build a more efficient production flow. Its modular platform can be configured around your current needs while leaving room to expand as production grows.
Ready to reduce manual jamb handling, improve production flow and plan your next stage of jamb automation?
Request a quote or book a demo with EuGénie International to validate your CN-M configuration, layout, operations and production requirements.
Call: 450-313-1321
Email: sales@eugenieinternational.com
