The Vicky is an automated solution for loading and unloading doors, which can be positioned upstream or downstream of your production line. Thanks to its 2-axis servo motor system, it offers precise, fast, and secure door positioning.
Compatible with all EuGenie equipment, the Vicky improves the fluidity of your operations while guaranteeing safe handling thanks to its suction cup lifting system and photoelectric protection (optional).
The Vicky adapts to different production needs with three distinct models:
| VC-1 Frequently Asked Questions | |
| Quick answers about the Vicky VC-1 chain lift door loader, its low-clearance design, automated door handling capabilities, vacuum lifting system, barcode integration, line configurations, and installation requirements. | |
| What is the Vicky VC-1? | The Vicky VC-1 is a chain lift door loader designed to automate door loading, unloading, and transfer around a production line. Its lower-clearance design provides automated door handling with a more compact height requirement. |
| Why is the VC-1 suited for lower-clearance production layouts? | The VC-1 uses a chain-based movement system designed specifically for production environments with limited overhead clearance. Its overall height is approximately 8 feet 2 inches, allowing automated door handling in layouts where taller loader configurations may not be suitable. |
| What door handling operations can the VC-1 automate? | The VC-1 can automate door loading, unloading, pallet pickup, and transfer between production stations. It can be configured for infeed, outfeed, or both depending on the production workflow and line layout. |
| What types of doors can the VC-1 handle? | The VC-1 is designed to handle flush doors, panel doors, doors with cutouts, and sidelights. Final compatibility should be confirmed based on the customer’s door construction, dimensions, surface characteristics, and production requirements. |
| What door sizes can the VC-1 handle? | The VC-1 supports doors up to 96 inches long, from 9 3/4 to 48 inches wide, with stack heights up to 50 inches. Final capacity should be validated with Eugenie based on the customer’s doors, pallet configuration, and application. |
| How does the VC-1 protect door surfaces during handling? | The VC-1 uses vacuum lifting with suction cups, foam pads, and non-marking rollers to help protect finished door surfaces and reduce marks, scratches, and handling damage during transfer. |
| How does the VC-1 vacuum pickup system work? | The VC-1 uses an adaptable vacuum lifting system that measures doors and adjusts pickup height for accurate and repeatable handling. The system is designed to accommodate a variety of doors and sidelights. |
| How fast can the VC-1 handle doors? | The VC-1 precision pickup system is designed for cycles under 60 seconds. Actual cycle time depends on the door dimensions, pallet arrangement, production line configuration, and required transfer sequence. |
| Does the VC-1 support barcode or ERP integration? | Yes. The VC-1 supports ERP and barcode integration for a connected production workflow. Doors can be scanned at the HMI or identified by the picker station so the correct production information can be sent to downstream equipment. |
| Can the VC-1 integrate with an automated door production line? | Yes. The VC-1 supports line-to-line communication and can be configured for infeed, outfeed, or combined handling. Left or right mirror configurations and front or rear loading setups allow the system to adapt to different production layouts. |
| What safety features are included on the VC-1? | The VC-1 includes interlocked guarding, photoelectric protection, emergency stop systems, and secure conveyor access to help support safer automated door handling and production line operation. |
| Does Eugenie provide production line integration support for the VC-1? | Yes. Eugenie provides expertise from equipment layout and commissioning through support, optimization, and future production growth, helping manufacturers integrate automated door handling into reliable and scalable production lines. |
| What are the VC-1 installation requirements? | The VC-1 requires 480 V three-phase electrical power, an Internet connection, and 100 PSI at 15 CFM of compressed air. Final installation requirements should be confirmed with Eugenie based on the production line layout and handling configuration. |
| What are the dimensions and footprint of the VC-1? | The VC-1 measures approximately 10 feet 10 inches long, 11 feet 3 inches wide, and 8 feet 2 inches high, with a listed footprint of 122 square feet. Final layout requirements should be reviewed with Eugenie before installation. |
The Vicky VL-1, VL-2, and VC-1 models are designed to meet the various needs of manufacturing workshops. Easy to integrate, they ensure a smooth management of the production flow while providing optimal safety for the operator.
The Vicky simplifies door loading and unloading while offering speed, safety, and precision. Automate intelligently and improve the productivity of your workshop.
To find out more about the Vicky and how it can improve your processes, request a free consultation or download the full brochure!
